rustic pillow covers How to Make a Spanish-Hemstitched Bottle Bag decorative pillow shams

2020-03-30 07:04:20 custom gift for Anniversary

Here’;s another quick project from Betty Stoltenburg, Portland OR. Spanish hemstitching adds a wonderful openwork accent to this bottle wrap. Make a coordinating set of Betty’;s Wine Slippers/Coasters?for a super house-warming or wedding gift.


accent pillow case baby burlap sofa

Step 1) Make the bias-bound strips.

Main fabric

Tip: Find a jar or mug with a 4″; diameter and trace around it to draw a 4″;-diameter circle.

Coordinating fabric

Sew the coordinating fabric strips together end to end, joining them with diagonal seams, to create one long strip. Trim seam allowances to 1/4″; and press open.

Attach the binder attachment and foot to your sewing machine and thread the needle and bobbin with coordinating thread. Using a straight stitch, sew the binding to both long edges of each 2-1/2″; x 14″; strip and to one long edge of each 1-3/4″; x 14″; strip.

After the strip edges are boundrustic pillow covers, continue sewing the binding closed to create the “;ribbon”; tie.

Step 2) Join the strips with Spanish hemstitching.

Remove the bias binder and foot and attach an open toe foot and the hemstitch attachment.

Thread the bobbin and needle with contrasting Isacord embroidery thread.

Set a ladder stitch (#702 on many BERNINA sewing machines) and change the stitch width to 9 mm (leave the length at 4 mm).?

Sew the strips together ?as shown, placing the bound edges of the strips against the sides of the Spanish Hemstitch attachment. ?Trim the resulting rectangle to 13″; tall.


Step 3) Add the ruffle.

Remove the hemstitch attachment and attach the ruffler, set to take 1 stitch between pleats.

Fold the 8″; x WOF strip in half lengthwise, wrong sides together. Stitch along the long raw edge, creating a ruffle.

Change to an all-purpose foot and stitch the ruffle to the top of the hemstitched rectangle using a 1/2″;-wide seam allowance.

Change to an overlock foot and select a vari-overlock stitch (#2 on many BERNINA models); overcast the raw edges together.

Tip: If you have an overlocker/serger, use it to seam and overcast the edges in one step.

Attach the edgestitch foot and move the needle three steps to the left (-3). Topstitch along the lower edge of the ruffle.

Step 4) Assemble the wine bag.

Change to a quarter-inch foot.

Fold the tie in half and baste it to the right side of the bag, just above the seam joining the ruffle to the bag.?

With right sides together, stitch the long sides of the bag together, including the ends of the ruffle, securing the tie in the stitching.

Overlock the raw edges together.

Fold the circle in half two time. Mark each fold with a straight pin and unfold the circle; it is now marked in quarters.

Fold the bag in half, then in half again. Mark the folds with straight pins; the bag is now marked in quarters.

Matching the quarter marks, stitch the circle to the base of the bag using a 1/4″;-wide seam allowance, easing the edge as needed.

Turn the bottle cover right side out.

Pin a wine or sparkling cider bottle in the bag, tie a bow, and trim the ends of the tie to the desired length.

If you’d like to know how to line one of your billion baskets you have cluttering up your house, you’re in the right spot.

Hey y'all! If you follow my blog, I hope you have already read this post about why we have chosen laminate floors for our home. And in that post I revealed that we would be tackling the master bedroom flooring installation next. Well, I am happy to report that it is DONE and it is absolutely gorgeous!